This SCADA, based on the geometry of the selected box and previous programming of variables by the operator, is capable of automatically parameterizing the trajectories and speeds of the robot axes for filling the sandbox. Installation made in FUDIKE.
Design and manufacture of equipment to control a painting arm with vertical movement. The arm, originally, was controlled by a DC motor and a special control card. As there were no spare parts, the motor was replaced by an AC motor and this compact equipment was designed to which the travel limits can be programmed […]
SCADA project for the control of a line of 4 heat treatment furnaces, dedicated to treating railway brake discs. The objective is to carry out the traceability of the pieces based on a record in a database of the treatment curve and various parameters of the oven control. In SCADA, the different heating curves are […]
This line transforms corrugated cardboard sheets into perfectly shaped and printed packaging boxes, with measures programmed by the control system. The line is made up of several independent machines, each one with its electrical panel and which are coupled with each other until the line is formed. The project consisted of carrying out: PLC programming […]
Automation project of an automatic continuous line with 2 chambers for heat treatments. The electrical control assembly was carried out with a PLC and a new field electrical installation was carried out. In the facility they can select and perform various types of treatments: HAT cycle HBT cycle HAT cycle Independent HBT Isothermal Cycle Hardening […]
SCADA project to control a line of 4 heat treatment furnaces, dedicated to treating railway brake discs, carried out for STANDARD FOUNDRY. The objective is to carry out the traceability of the pieces based on a record in a database of the treatment curve and various parameters that intervene in the process. In SCADA, […]
Automation project for 4 furnaces for heat treatments. The equipment and software used were SIEMENS. A new electrical project was designed, an electrical cabinet was manufactured with a PLC and a TP and the field electrical installation of each furnace was carried out. As a control system for the entire line, a PC was installed […]
In order to prevent access to the interior of the press and due to its movement handicap, this security element was designed which blocks the downward movement.