AUXILIARY SHAFT BELT
Design and construction of an auxiliary shaft for a motor winding strapping installation. Manufactured for INDAR.
Scada Control Robot
This SCADA, based on the geometry of the selected box and previous programming of variables by the operator, is capable of automatically parameterizing the trajectories and speeds of the robot axes for filling the sandbox. Installation made in FUDIKE.
Arm Paint
Design and manufacture of equipment to control a painting arm with vertical movement. The arm, originally, was controlled by a DC motor and a special control card. As there were no spare parts, the motor was replaced by an AC motor and this compact equipment was designed to which the travel limits can be programmed […]
Scada Motor 1000KW
SCADA project for the control of a line of 4 heat treatment furnaces, dedicated to treating railway brake discs. The objective is to carry out the traceability of the pieces based on a record in a database of the treatment curve and various parameters of the oven control. In SCADA, the different heating curves are […]
Deep Cardboard Packaging Line
This line transforms corrugated cardboard sheets into perfectly shaped and printed packaging boxes, with measures programmed by the control system. The line is made up of several independent machines, each one with its electrical panel and which are coupled with each other until the line is formed. The project consisted of carrying out: PLC programming […]
Continuous heat treatment furnace
Automation project of an automatic continuous line with 2 chambers for heat treatments. The electrical control assembly was carried out with a PLC and a new field electrical installation was carried out. In the facility they can select and perform various types of treatments: HAT cycle HBT cycle HAT cycle Independent HBT Isothermal Cycle Hardening […]
Electrical installations in offices
Design, electrical project, electrical installation and legalization before the general office industry.
ROBOT LOADER CELL WITH 2 CNC LATHES
The cell consists of the loading and unloading of parts to 2 CNC lathes with a robot. The design and construction of an appropriate charger for the installation and a control cabinet for the management between the robot, the CNC and the safety was carried out.
GROUND CELL
The control is carried out with SIEMENS and the application has a PC with a SCADA to manage the different models. This cell is intended for sanding hammers and pots and is mounted on a platform to facilitate its transfer. It consists of a robot, 2 sanders, a laser engraver, an artificial vision equipment and […]
Forging cell 1
This automatic cell is intended for the forging of screws for the wind power sector. It is made up of a parts loader, 2 robots, an induction oven, a press and an evacuation belt. It has a PLC and a SIEMENS TP to control the installation. The cell is designed so that a single operator […]