ULMA FORGE Security Door
Analysis, design and assembly of a security system to avoid metallic projections in a pneumatic forging hammer.
The installation consists of 2 sliding doors and 2 fixed panels.
The actuation of the system is pneumatic.
Security Door CIE GALFOR
The installation consists of 4 sliding doors and 2 fixed panels.
To avoid entrapment when closing the doors, a special security barrier is installed.
The control is by means of a PLC and the maneuver is
Integrated in the operation of the hammer.
INCIDENTS
- 1.-Projection of some discs causing breakage of the glass and deformation of a steel handle.
2.-Fall of the upper hammer due to poor fixation, displacing the operator and avoiding entrapment.
Both incidents without causing injury to the operator.
Related Posts
-
AUXILIARY SHAFT BELT
Design and construction of an auxiliary shaft for a motor winding strapping installation. Manufactured... -
Feeders for lines with robots
Depending on the piece to be handled, loaders or machines are designed whose mission is to position the... -
Forging plug loaders
The plugs are randomly deposited in the tank and the installation positions them in an orderly fashion... -
Bar loader for saw input
Design and construction of an electrically operated bar loader to feed a cutting saw. The operator deposits... -
Security fencing
Assembly and electrical installation of security fencing for rolling mill 3 at the ARCELOR MITTAL company...
Comments are closed, but trackbacks and pingbacks are open.